[Electrical] CANON

[sweet.persona]

Hi to all

I have canon 4410 when i turn power on machine warming up , and displaying UNDER VOLTAGE and a red spot light !!!!!!

and i cannot copying , (machine does't ready to copy)

can any one help me

thank you in advance

[teckat]

Re: CANON

Hi to all

I have canon 4410 when i turn power on machine warming up , and displaying UNDER VOLTAGE and a red spot light !!!!!!

and i cannot copying , (machine does't ready to copy)

can any one help me

thank you in advance

--------------------------------
check
Low Voltage Power Supply

When the power is turned ON and DC power is supplied through the low voltage power inside engine controller, CPU starts the printer operation control.


Low voltage power circuit carries the over-current preventive function against and over-voltage preventive function that block the voltage output automatically to prevent the power circuit brokerage when the over-current or over-voltage occur due to load errors such as short circuit
etc.
Thus, when the DC power cannot be output from the low voltage circuit, the protective function against over-current or over-voltage may be working. Turn OFF the power switch (SW1) to fix load errors and turn ON the switch again.

[sweet.persona]

Re: CANON

Hi to all ,

i have turn on and off sw1 many times But problem Not resolved!!!!! please how can i reset it