IRC 3200 Continuous running

[copierhunter]

Dear friends,
pls help me

IRC 3200 Continuous running non stop.
i got some error, so i did RAM clear.
after that machine is Continuous running.
what i have to do,
what is the steps i have to do ?
pls tell the calibration steps.


thankx in advance

[migsjun]

friend,

pls do specify your problem... is it printing from your pc or just from copy mode?

[copierhunter]

IRC 3200 continous running

it is in copy mode.

pls tell, calibration steps or specs

[yourownfree]

does it say anything in the display? does it ever stop with an error code?
does it have a display and is there a progress bar or does it show the copy screen? what was the last jam code and error code it had? can you get to the service mode again? maybe you need to just re-flash it. You said you did a ram clear? what was the exact wording on the display of the area you cleared? There is no ram clear word.

[kajsa39]

This may sound like a canon dealernet answer but have you tried upgrading the firmware as this will resolve many problems on this product it's worked for me.

[regalcopy]

DRUM UNIT'S CHIP NEEDS CHANGE, CHANGE DRUM UNIT &
PROBLEM WILL GO for sure
regalcopy@rediffmail.com

no need to reset the machine

[alex@wocltd.com]

why did you clear ram? curious as always a last resort.
what are the values of the drums?
can you see pattern being laid on itb?
more information as perhaps we can achieve something