iR ADV C2020i network scaner configuration how?

[shomyx]

please help! I got problem with settings configuration to scan and send directly to folder on PC over network!!! I need help in steps what I need to configure on PC and what on copier/scanner! scan net gear installed, and ufrII too, printing and coping work ok but this is problem. how to set path to scaned document send directly in desired foler? PC Win7 64bit, ip adress set in range - ping ok.

Thank to everyone!

[teckat]

Re: iR ADV C2020i network scaner configuration how?

How to access and start (Color) Network ScanGear

IMPORTANT
If you are using (Color) Network ScanGear for the first time after installing it, the network scanner to be used must be selected with the ScanGear Tool. The (Color) Network ScanGear driver cannot be started at the same time as the ScanGear Tool. If the ScanGear Tool is running, close it.

* Note - The Color-Enabled iRs and B&W iRs that have color scan capability such as the iR3245 must use Color Network ScanGear, which operates in the same manner.

(Color) Network ScanGear is started by accessing it from a TWAIN compliant application as follows:
1. On the imageRUNNER-iR copier, press the Scan button. Press Online.
2. On the PC, start the TWAIN-compliant application.
3. In the application, select (Color) Network ScanGear as the scanner to be used. In the application, choose the command that selects a scanner, then select (Color) Network ScanGear in the dialog box that appears. After doing this operation once, there is no need to repeat it.
4. In the application, choose the command that starts scanning operation (for example, "Scan New" or "Acquire"). The (Color) Network ScanGear Main Window appears. Individual items in this window are explained below.

NOTE:
See the documentation provided with your software application for commands and procedures used to select (Color) Network ScanGear and start scanning.

The window that appears when (Color)Network ScanGear is opened in an application is called the (Color) Network ScanGear Main Window.

The (Color) Network ScanGear Main Window includes the following items.



see link>>>>}

How to setup scanning on Canon MFPs.doc