If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Yeah the old NP dev cylinders that were silver..cleaned them with Soft Scrub. When NP6230 came along,they started coating cylinder with black layer. It scrubs right off. Those babies..bare it,wipe it with alcohol. No go,change the cylinder. And that blade in the dev housing..it trims the thickness of the toner layer on the cylinder..us old school duplicator days techs call them trimmer bars.
===========
gaped the bar ends with a thin metal ruler / for even brush
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment