iR-ADV C5051 Series / iR-ADV C5255 Series--E009-0000 Error Codes

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083
    #1

    [Error Code] iR-ADV C5051 Series / iR-ADV C5255 Series--E009-0000 Error Codes

    imageRUNNER ADVANCE C5051/ C5045/ C5035/ C5030 / C5255 / C5250 / C5240 / C5235

    Minimizing E009-0000 Error Codes

    Measure against E009-0000 caused by the Fixing Assembly not meshing properly with the Fixing Drive Assembly.
    DETAILS:
    After repeated pressure roller and fixing roller operations the frame of the Fixing Drive Assembly will become deformed.
    Once the frame of the Fixing Drive Assembly is deformed the contact for the pressure roller drive gear will not mesh properly and cause E009-0000 error codes.
    The shape of the pressure plate and the fixing drive assembly plate has been changed and an added screw has been implemented for the
    mounting of the Fixing Assembly to ensure a proper gear mesh.

    SERVICE WORK:
    Please follow the attached procedure named “E009-0000”.pdf.

    Minimizing E009-0000 Error Codes.pdf

    E009-0000.pdf
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**
    Tags: 240, 250, code, codes, color, error, fixing, pdf, roller, work
    • Canuck
      Tech Specialist

      1,000+ Posts
      • Nov 2007
      • 1713
      #2
      Re: iR-ADV C5051 Series / iR-ADV C5255 Series--E009-0000 Error Codes

      Run into this on 5030/5045 series also. When the fixing motor reverses to release the pressure between the lfr and film assembly,the plate doesnt hold the cam sufficiently and it turns and clicks. I clean off all the grease,slightly reform the plate and usually goes away. Bulletin good to know too. I've changed fixing drive assemblies on many 5030s for jamming issues. Canon has bulletin out on it

        Comment

        • Canuck
          Tech Specialist

          1,000+ Posts
          • Nov 2007
          • 1713
          #3
          Re: iR-ADV C5051 Series / iR-ADV C5255 Series--E009-0000 Error Codes

          Run into this on 5030/5045 series also. When the fixing motor reverses to release the pressure between the lfr and film assembly,the plate doesnt hold the cam sufficiently and it turns and clicks. I clean off all the grease,slightly reform the plate and usually goes away. Bulletin good to know too. I've changed fixing drive assemblies on many 5030s for jamming issues. Canon has bulletin out on it

            Comment

            Previous template Next
            Working...