IRC5030 E027-0200

[Canuck]

Re: IRC5030 E027-0200

er, fold a paper clip over.......

Exactly....paper clips are a techs best friend. I've temporarily fixed broken paper guides by heating a clip up with my lighter then embedding it into the 2 broken plastic pieces.

[jmandassociates]

Re: IRC5030 E027-0200

------------------------;
If film is not worn and there is no residue found in the fuser see below--

Change Service Mode value to:

LVL2 Service Mode>COPIER>OPTION>IMG-FIX>PRE-FXRL>set to 1.

This turns on "pressure roller soiling prevention mode". After turning this Service Mode feature on, the paper stopped wrapping around the the fixing unit's pressure roller.



Inspect & Re seat the separation plate to its proper position if necessary
[ATTACH]22162[/ATTACH]

I don't see PRE-FXRL in the menu. 20130919_141054.jpg

[teckat]

Re: IRC5030 E027-0200

I don't see PRE-FXRL in the menu. [ATTACH=CONFIG]22180[/ATTACH]

Are u in Level 2 ?

[jmandassociates]

Re: IRC5030 E027-0200

Not sure I did Settings Registration button 2, 8 Settings registration button to get into the service mode

[teckat]

Re: IRC5030 E027-0200

Not sure I did Settings Registration button 2, 8 Settings registration button to get into the service mode

----------------------------

ON THIS MODEL/SERIES

SERVICE MODES
Switching Screen (Level 1 < - > 2)

Switching screens between level 1 and 2 has been made easier.
When level 1 screen is displayed, press <LEVEL 1> in the right upper side of the screen, and
it will switch to level 2.

L1.JPG
L2.JPG

[jmandassociates]

Re: IRC5030 E027-0200

----------------------------

ON THIS MODEL/SERIES

SERVICE MODES
Switching Screen (Level 1 < - > 2)

Switching screens between level 1 and 2 has been made easier.
When level 1 screen is displayed, press <LEVEL 1> in the right upper side of the screen, and
it will switch to level 2.

[ATTACH=CONFIG]22183[/ATTACH]
[ATTACH=CONFIG]22182[/ATTACH]

I was in level 2 if you look at the picture I uploaded it says level 2 in the upper right.

[teckat]

Re: IRC5030 E027-0200

I was in level 2 if you look at the picture I uploaded it says level 2 in the upper right.

------------------------------------




Spank Me
Sorry--that was for the iRADC 2030 SERIES