Canon PC 850

[mickspace]

I need some help with this PC 850, it is giving an E 007 Code, if any one should happen to have a service manual and parts guide, I would be willing to exchange a few manuals. (I have Sharp, Toshiba, A few Xerox, Lexmark, HP and Ricoh). I am helping a friend with repairing their machine, and a manual would be a great help.
Thank You...

Mick

[peterepeat]

I don't have a manual handy but I believe it centers around the fixing film being out of line. There is a sensor that monitors the tracking of the film from front-to-back of the machine by the edge of the film. Likely needs new upper fixing assembly. The attached bulletin may help.

[amuba]

I don't have a manual handy but I believe it centers around the fixing film being out of line. There is a sensor that monitors the tracking of the film from front-to-back of the machine by the edge of the film. Likely needs new upper fixing assembly. The attached bulletin may help.

Indoresettter
download Free printer or RESET CANON

[mickspace]

I don't have a manual handy but I believe it centers around the fixing film being out of line. There is a sensor that monitors the tracking of the film from front-to-back of the machine by the edge of the film. Likely needs new upper fixing assembly. The attached bulletin may help.

Thanks I will give that a try, how do you enter service mode with this machine.. Thanks again..

[peterepeat]

Service Mode:
- Remove control panel (2 screws) but keep the ribbon connector connected
- Close the clamshell
- Short JP103 & JP104 with a flat-head screwdriver and power on until the display reads "F"