[Electrical] F1 Finisher on Canon IR 5000

[Jedenco]

Hello,

I have a Canon IR 5000 with a F1 Finisher that the bins go all the way down and stay there. No error code and copy paper exits the finisher. I have replaced the Finisher board and checked the upper and lower bin limit switches. Any recommendations would be sincerely appreciated.

Thanks
J.

[teckat]

Re: F1 Finisher on Canon IR 5000

Hello,

I have a Canon IR 5000 with a F1 Finisher that the bins go all the way down and stay there. No error code and copy paper exits the finisher. I have replaced the Finisher board and checked the upper and lower bin limit switches. Any recommendations would be sincerely appreciated.

Thanks
J.

\\\\\\\\\\\\\\\\\\\\\;

Check for a loose pin contact at MS5 (Tray Upper Limit Detecting Switch), J132-1 and J132-2.