If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have done a conversion from USA - Europe system using a 3 phase transformer, but the machine was a Heidelberg Quickmaster.
I am afraid image-press would be more sensitive, and you might get strange symptoms difficult to address.
I have done a conversion from USA - Europe system using a 3 phase transformer, but the machine was a Heidelberg Quickmaster.
I am afraid image-press would be more sensitive, and you might get strange symptoms difficult to address.
I think that a lot of these color machines were designed to be used either way, just not sure of the proceedure and don't want to sell something that will be problematic.
I think that a lot of these color machines were designed to be used either way, just not sure of the procedure and don't want to sell something that will be problematic.
The CED Customer Expectation Document says that step down transformers and power converters are not supported. I wonder if you could get a 50 HZ power station for them?
Comment