[Misc] IRCADV 9065 Finisher

[Alex ahir]

got adv 9065. It works fine like printing, copying faxing but when i connect finisher, it never recognize we changed

curler, power supply relay supply but same. We try this finisher with other copier it works absolutely fine. Looks

like there is not power at all on the finisher. Any ideas ??

[teckat]

Re: IRCADV 9065 Finisher

got adv 9065. It works fine like printing, copying faxing but when i connect finisher, it never recognize we changed

curler, power supply relay supply but same. We try this finisher with other copier it works absolutely fine. Looks

like there is not power at all on the finisher. Any ideas ??

------------------------------------
do u receive a connect message ???

FINISHER A1 or B1

Did u check the internal connections on printer frame side

[Alex ahir]

Re: IRCADV 9065 Finisher

------------------------------------
do u receive a connect message ???

FINISHER A1 or B1

Did u check the internal connections on printer frame side

yaah checked everything, i had replaced power and relay PCB but same.

NO nothing no power at all. i think its A1 finisher

[teckat]

Re: IRCADV 9065 Finisher

yaah checked everything, i had replaced power and relay PCB but same.

NO nothing no power at all. i think its A1 finisher

===============


if Finisher works on other printers/ it's an internal issue on problem printer