falah taan

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Eric1968
    Service Manager

    1,000+ Posts
    • Jan 2009
    • 2458

    #16
    Re: falah taan

    Originally posted by IkeW0491
    OK SO let's try this page:

    Canon U.S.A. : Support & Drivers : Color imageRUNNER C2880

    Not sure if you can get it here, BUT there is a link for Drivers and Software.

    IF they have it, it should be there.

    IKE
    If you are a tech (what I doubt), you should know that firmware and drivers are two completely different things. Almost all manufacturers don't offer firmware for MFP's as a free download for everybody. You must be a trained tech to access firmware.

    Comment

    • Brian8506
      Service Manager

      Site Contributor
      1,000+ Posts
      • Feb 2009
      • 1664

      #17
      Re: falah taan

      COW C-O-W-E-I-E-I-O

      Comment

      • IkeW0491
        Trusted Tech

        100+ Posts
        • Oct 2013
        • 172

        #18
        Re: falah taan

        Thank you for the response Eirc,

        Finally got an answer that helps me and Falah,

        At least now he knows that he may not be able to get the firmware without going directly through canon as a trained tech.

        Still don't understand why they have a LINK for Firmware on their downloads page IF they don't offer it!!

        "Kind of stupid to have a link that is worthless"


        Originally posted by Eric1968
        If you are a tech (what I doubt), you should know that firmware and drivers are two completely different things. Almost all manufacturers don't offer firmware for MFP's as a free download for everybody. You must be a trained tech to access firmware.

        Comment

        • totoro
          Senior Tech

          Site Contributor
          500+ Posts
          • Apr 2008
          • 568

          #19
          Re: falah taan

          Originally posted by IkeW0491
          Hi Falah,

          If I am not mistaken,

          Most firmware can be downloaded directly from Canon's web site.

          Just go to Canon U.S.A. : Firmware Updates this should get you to where you need to be to get the firmware for our copier.

          If not you can send them an email with the model & Serial number info and I am sure they can help you get the right firmware.

          IKE
          If you look from this link that you posted, it is to Canon Professional Imaging products. I.e. camera, camcorders, projectors and such. For these products Canon does provide firmware updates as these are small home/office products that would be brought in\ shipped back for service items. I hope that explains it better.
          Totoro

          Comment

          • falah taan
            Technician
            • Feb 2013
            • 67

            #20
            Re: falah taan

            sory i mean firmwear hwo can i get it

            Comment

            • Hansoon
              Field Supervisor

              Site Contributor
              2,500+ Posts
              • Sep 2007
              • 3374

              #21
              Re: falah taan

              Firmwear?

              Most techs call it FIRMWARE.

              Don't want to tease you but people are getting nervous here cause there was a firmwar in the past on this site.

              Hans

              * Edit: See how confusing this all is? Of course its Frimwar, excuse my typo please......... *
              Last edited by Hansoon; 10-27-2013, 06:43 AM.
              “Sent from my Intel 80286 using MS-DOS 2.0”

              Comment

              • Eric1968
                Service Manager

                1,000+ Posts
                • Jan 2009
                • 2458

                #22
                Re: falah taan

                Originally posted by falah taan
                sory i mean firmwear hwo can i get it
                You must be a trained tech. If you're not you can get it at Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads

                Comment

                • Eric1968
                  Service Manager

                  1,000+ Posts
                  • Jan 2009
                  • 2458

                  #23
                  Re: falah taan

                  Originally posted by Hansoon
                  Firmwear?

                  Most techs call it FIRMWARE.

                  Don't want to tease you but people are getting nervous here cause there was a firmwar in the past on this site.

                  Hans
                  No, it's not firmwar. It's FRIMWARS..

                  Comment

                  • JustManuals
                    Field Supervisor

                    5,000+ Posts
                    • Jan 2006
                    • 9838

                    #24
                    Re: falah taan

                    Originally posted by falah taan
                    sory i mean firmwear hwo can i get it

                    You can't unless some putz comes along thinking he's doing you a favor. And when you're asking a stranger to go out of their way to do you a favor, it's courtesy in this country to say 'PLEASE' or a 'Thank you in advance' Of course you could always PAY for it too.
                    Last edited by JustManuals; 10-26-2013, 10:55 PM. Reason: typo

                    Comment

                    • IkeW0491
                      Trusted Tech

                      100+ Posts
                      • Oct 2013
                      • 172

                      #25
                      Re: falah taan

                      I guess when I need a Canon Camera Manual I can go to your site.

                      Sure aren't any copier manuals for cannon's there.

                      At least not under a general search for "Canon"

                      Thanks for the link.


                      Originally posted by JustManuals.com

                      You can't unless some putz comes along thinking he's doing you a favor. And when you're asking a stranger to go out of their way to do you a favor, it's courtesy in this country to say 'PLEASE' or a 'Thank you in advance' Of course you could always PAY for it too.

                      Comment

                      • JustManuals
                        Field Supervisor

                        5,000+ Posts
                        • Jan 2006
                        • 9838

                        #26
                        Re: falah taan

                        I've got over 800 Canon manuals. You just don't know how to search.

                        Comment

                        • JustManuals
                          Field Supervisor

                          5,000+ Posts
                          • Jan 2006
                          • 9838

                          #27
                          Re: falah taan

                          Originally posted by Eric1968
                          No, it's not firmwar. It's FRIMWARS..
                          FRIMWARS.............The new reality series coming to a network near you.

                          Comment

                          • IkeW0491
                            Trusted Tech

                            100+ Posts
                            • Oct 2013
                            • 172

                            #28
                            Re: falah taan

                            Please enlighten me on how to search your site.

                            I searched with the word Canon, with the word ImageRunner, the word Image Runner, with 8095.

                            None of which came up with ANY CANON COPIERS.
                            (Under search term canon: I saw a myriad of cameras, but No copiers).

                            So unless you have them listed under some "OBSCURE" heading, I am not sure why they would not come up under at least 1 of those search terms!!

                            I have been using Boolean searches for over 25 years I think I know how to search.


                            Originally posted by JustManuals.com
                            I've got over 800 Canon manuals. You just don't know how to search.

                            Comment

                            • IkeW0491
                              Trusted Tech

                              100+ Posts
                              • Oct 2013
                              • 172

                              #29
                              Re: falah taan

                              Thank you to whoever posted this "rep Comment"

                              "Thread: falah taan YO Schmuck!
                              "
                              You truly show your maturity (or lack there of)!!

                              I truly appreciate your feedback, but apparently when the shoe is on the other foot, it is not reciprocal

                              IKE

                              Comment

                              • Eric1968
                                Service Manager

                                1,000+ Posts
                                • Jan 2009
                                • 2458

                                #30
                                Re: falah taan

                                Originally posted by IkeW0491
                                Please enlighten me on how to search your site.

                                I searched with the word Canon, with the word ImageRunner, the word Image Runner, with 8095.

                                None of which came up with ANY CANON COPIERS.
                                (Under search term canon: I saw a myriad of cameras, but No copiers).

                                So unless you have them listed under some "OBSCURE" heading, I am not sure why they would not come up under at least 1 of those search terms!!

                                I have been using Boolean searches for over 25 years I think I know how to search.
                                The most manufacturers only offer firmware when you are a trained tech. Firmware for MFP's is only available when you have a user account. That's why you can't Google it... If you don't know what you're doing, loading firmware can cause your machine to stop functioning. Every manufacturer has its' own way of loading firmware. I only upgrade firmware when it's solving a problem or if it adds functionality. In all other cases I just don't upgrade.

                                Don't try to fix it if it ain't broke....
                                Last edited by Eric1968; 10-28-2013, 07:51 PM.

                                Comment

                                Working...