iR 5075 E00400-0100 after replacing Fixing unit

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Apach
    Trusted Tech
    • Nov 2010
    • 157

    #1

    [Error Code] iR 5075 E00400-0100 after replacing Fixing unit

    Hi,





    After replacing the fixing unit devices worked several thousand copies and threw mistake E00400-0100th Does anyone know in what refers to the error. Also after every 30-50 copy paper is jammed.
    There is no stupid question, just stupid answer
  • canonbundy
    Senior Tech

    500+ Posts
    • Jun 2012
    • 607

    #2
    Re: iR 5075 E00400-0100 after replacing Fixing unit

    Cause
    Communication error between ADF CONTROLLER and MEMORY PCB.


    Action
    1. Reseat the cable going from the ADF CONTROLLER to MEMORY PCB.
    2. If E400 is still present it has been found that replacing the ADF Controller (FM3-0370-000) or MEMORY PCB (FM3-0472-000 / New PN: FM3-4436-000) may be necessary.
    3. If symptom persists, replace the DF-RD26 Shield Cable (FK2-5118-000).

    Comment

    • Apach
      Trusted Tech
      • Nov 2010
      • 157

      #3
      Re: iR 5075 E00400-0100 after replacing Fixing unit

      Thanks

      Damaged conector on ADF CONTROLLER.

      There is only a problem of paper jamming. After a 30-50 double-sided copies comes to paper jamming. Tomorrow I will have a look at this part, so if anyone has advice?
      There is no stupid question, just stupid answer

      Comment

      • northernlife
        Senior Tech

        500+ Posts
        • Sep 2011
        • 847

        #4
        Re: iR 5075 E00400-0100 after replacing Fixing unit

        give us a jam code we'll find you a solution

        Comment

        Working...