IR3300 quality issue

[msmy]

Hi,

Currently my IR3300 give very light (almost cannot read) text - see attachment.
IR3300.pdf

action taken; I replaced;

1) New drum
2) New toner tank

but not successful.

Please Help..

[teckat]

Re: IR3300 quality issue

Hi,

Currently my IR3300 give very light (almost cannot read) text - see attachment.
[ATTACH]23036[/ATTACH]

action taken; I replaced;

1) New drum
2) New toner tank

but not successful.

Please Help..

-------------------------------
from the Glass and on Test Prints

If the image on the drum is good. - Replace the Transport Bed Varistor


A poor contact with the Developer Bias Tab can cause lack of Developer Bias.Check the Developer Bias Tab inside the machine and reform the Developer Bias Tab to better fit the Developer Unit contact.

[msmy]

Re: IR3300 quality issue

-------------------------------
from the Glass and on Test Prints

If the image on the drum is good. - Replace the Transport Bed Varistor


A poor contact with the Developer Bias Tab can cause lack of Developer Bias.Check the Developer Bias Tab inside the machine and reform the Developer Bias Tab to better fit the Developer Unit contact.

Thank you teckat,

Problem solved. I change the polygon motor today.

cheers..

[teckat]

Re: IR3300 quality issue

Thank you teckat,

Problem solved. I change the polygon motor today.

cheers..

--------------------

U had a bad polygon motor & u did not receive an E110 Code