Quick help iR105

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • V-P
    Senior Tech

    Site Contributor
    500+ Posts
    • Apr 2011
    • 679
    #1

    Quick help iR105

    As stupid as it may seem...

    I cannot find in Service Mode where to deactivate the finisher on an old iR105.

    It is supposed to be under COPIER > OPTION > ACCPST-D like in iR7105, but it is not.

    Ideas ?
    Tags: None
    • teckat
      Field Supervisor

      Site Contributor
      10,000+ Posts
      • Jan 2010
      • 16083
      #2
      Re: Quick help iR105

      Originally posted by V-P
      As stupid as it may seem...

      I cannot find in Service Mode where to deactivate the finisher on an old iR105.

      It is supposed to be under COPIER > OPTION > ACCPST-D like in iR7105, but it is not.

      Ideas ?
      ---------------------------

      COPIER>DISPLAY>ACC-STS
      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Rachid.Akli
          Senior Tech

          500+ Posts
          • Oct 2011
          • 595
          #3
          Re: Quick help iR105

          When installing the IR7105, we used to enter the position of the different accessory options via COPIER > OPTION > ACCPST-D. It was not the case with the IR105. We were just installing the options without any other configuration in the machine side service mode.

          What is your issue ?

          Rachid.
          "Find a job you love and you’ll never have to work a day in your life." Nagy's father

            Comment

            • V-P
              Senior Tech

              Site Contributor
              500+ Posts
              • Apr 2011
              • 679
              #4
              Re: Quick help iR105

              Originally posted by teckat
              ---------------------------

              COPIER>DISPLAY>ACC-STS
              Maybe I wasn't clear

              I want to cut off the finisher from the machine and insert the "0" value somewhere in the service mode to tell the machine that there is no finisher attached.

              I cannot find where is it... that is the problem...

                Comment

                • V-P
                  Senior Tech

                  Site Contributor
                  500+ Posts
                  • Apr 2011
                  • 679
                  #5
                  Re: Quick help iR105

                  Originally posted by Rachid.Akli
                  When installing the IR7105, we used to enter the position of the different accessory options via COPIER > OPTION > ACCPST-D. It was not the case with the IR105. We were just installing the options without any other configuration in the machine side service mode.

                  What is your issue ?

                  Rachid.
                  I was not at the customer myself - but he told me that when he unplugged the finisher - some error came up. So I guess smth must be changed in service mode.

                    Comment

                    • teckat
                      Field Supervisor

                      Site Contributor
                      10,000+ Posts
                      • Jan 2010
                      • 16083
                      #6
                      Re: Quick help iR105

                      Originally posted by V-P
                      I was not at the customer myself - but he told me that when he unplugged the finisher - some error came up. So I guess smth must be changed in service mode.
                      -----------------------------------
                      K3/K4

                      switch PCB
                      SW971: enable/disables the unit.


                      SW971.JPG


                      SW971--.JPG
                      **Knowledge is time consuming, exhausting and costly for a trained Tech.**

                        Comment

                        Previous template Next
                        Working...