Canon ImageRunner C3080 fiery removal

[mkelly1967]

Hello everyone,

We received a Canon ImageRunner C3080 with a fiery attached as a trade in. Is it possible to remove the fiery and set up the system for standard print and scan?

Thanks in advance for all your help!!!

Mike

[teckat]

Re: Canon ImageRunner C3080 fiery removal

Hello everyone,

We received a Canon ImageRunner C3080 with a fiery attached as a trade in. Is it possible to remove the fiery and set up the system for standard print and scan?

Thanks in advance for all your help!!!

Mike

-------------------------------------------
UFRII printing is not available if the optional imagePASS J1 is used------

why would u want to remove the imagePass J1 Fiery


License options and RB-A board are necessary for all the printer options.
* PS Printer Kit-Q1 requires that PCL Printer Kit-Q1 and iR 512MB Expansion RAM-C1 be previously installed.
In order to use UFR II, PCL, PS, the memory capacity must be 1.5GB.
In order to use UFR II, PCL, and PS, RB-A board must be attached onto the main controller.
A Color PCL Printer Kit is available for purchase use, as a network printer.

Network Scan function enables you to use the machine as a conventional scanner.
You can scan a document using the machine, and read the data in an application you are using on your computer.
To use this function, the machine is required to be connected to a network, and the Color Network ScanGear software installed

Color Network ScanGear
http://software.canon-europe.com/software/0039663.asp