If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Canon ir 105 feeder shows paper jam, cleaned all sensors, initialized etc but to no avail.The led in feeder board shows E4J , what could be the problem, please help.thanks in advance.
Canon ir 105 feeder shows paper jam, cleaned all sensors, initialized etc but to no avail.The led in feeder board shows E4J , what could be the problem, please help.thanks in advance.
===========
look in service mode listing
(COPIER>DISPLAY>JAM/ERR)
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment