[Electrical] Canon IRC3580i Black Problem

[Hong1007]

hi
i hv 1 machine canon irc3580i , after i do auto gradation after i print PG10 the colour become vry blur , expecially black colour
got any solution? gv the colour bright bck?


Regards
IMG_1196.jpg

[teckat]

Re: Canon IRC3580i Black Problem

hi
i hv 1 machine canon irc3580i , after i do auto gradation after i print PG10 the colour become vry blur , expecially black colour
got any solution? gv the colour bright bck?


Regards
[ATTACH=CONFIG]23516[/ATTACH]

1=first Clean the patch sensors and perform an auto color correction mismatch
To perform an auto color correction mismatch, Enter Additional Functions Adjustments and Cleaning. On page three select auto color mismatch correction.
To clean the patch sensors manually actuate the solenoid to open the shutters and wipe the sensors with a dry lint free cloth.

Below is a photo of the solenoid and shutters that cover the sensors.






2=now Perform a LEVEL 2> COPIER> FUNCTION> CLEAR> REG, and
then do the quick and full auto gradation
improves the registration

[Hong1007]

Re: Canon IRC3580i Black Problem

1=first Clean the patch sensors and perform an auto color correction mismatch
To perform an auto color correction mismatch, Enter Additional Functions Adjustments and Cleaning. On page three select auto color mismatch correction.
To clean the patch sensors manually actuate the solenoid to open the shutters and wipe the sensors with a dry lint free cloth.

Below is a photo of the solenoid and shutters that cover the sensors.





2=now Perform a LEVEL 2> COPIER> FUNCTION> CLEAR> REG, and
then do the quick and full auto gradation
improves the registration

Ok, later i try it
thanks u vry much

[Hong1007]

Re: Canon IRC3580i Black Problem

1=first Clean the patch sensors and perform an auto color correction mismatch
To perform an auto color correction mismatch, Enter Additional Functions Adjustments and Cleaning. On page three select auto color mismatch correction.
To clean the patch sensors manually actuate the solenoid to open the shutters and wipe the sensors with a dry lint free cloth.

Below is a photo of the solenoid and shutters that cover the sensors.






2=now Perform a LEVEL 2> COPIER> FUNCTION> CLEAR> REG, and
then do the quick and full auto gradation
improves the registration

Hi

the service mode level 2 inside no have REG!!

[teckat]

Re: Canon IRC3580i Black Problem

Hi

the service mode level 2 inside no have REG!!

-------------------------
what is firmware ver.

If Auto color correction mismatch is not an option, be sure to update the firmware to the latest version.