iR3300-won-t-print

[paroh]

Look at the below site. i have this type of problem . Please help me to resolve it

http://www.thecopiernetwork.com/showthread.php?7148-iR3300-won-t-print&highlight=3300

[northernlife]

Re: iR3300-won-t-print

PS/PCL is a kit. Totally different than the N bootrom. The only thing the bootom does is enable the nic for the N bootrom and disable the nic for the C bootom. You need an N bootrom as well as the Network Multi PDL Print Kit C1. If version PS/PCL are blank and you have an N rom you will still be unable to print as the print personality is not installed on the device.

[paroh]

Re: iR3300-won-t-print

PS/PCL is a kit. Totally different than the N bootrom. The only thing the bootom does is enable the nic for the N bootrom and disable the nic for the C bootom. You need an N bootrom as well as the Network Multi PDL Print Kit C1. If version PS/PCL are blank and you have an N rom you will still be unable to print as the print personality is not installed on the device.

As i am previously able to take print out that means the machine is having all the necessary hardware installed to make a print out from the computer attached to machine. The problem occurs when i clear the ram because of some error.
The machine display language changes from Eng to Japa.


Multi PDL Print Kit C1. If version PS/PCL are black (I think i need software for PS/PCL on the copier)

Can u please provide the software of PS/PCL on the copier

[canonbundy]

Re: iR3300-won-t-print

As i am previously able to take print out that means the machine is having all the necessary hardware installed to make a print out from the computer attached to machine. The problem occurs when i clear the ram because of some error.
The machine display language changes from Eng to Japa.


Multi PDL Print Kit C1. If version PS/PCL are black (I think i need software for PS/PCL on the copier)

Can u please provide the software of PS/PCL on the copier

This is the 3rd separate post on the same question, the information has been given................. you stuffed up BIG time when performing a Factory Reset...........ALL PCL, PS3 EVERYTHING info has GONE.............the machine has less uses now than a Boat Anchor.

[paroh]

Re: iR3300-won-t-print

This is the 3rd separate post on the same question, the information has been given................. you stuffed up BIG time when performing a Factory Reset...........ALL PCL, PS3 EVERYTHING info has GONE.............the machine has less uses now than a Boat Anchor.

So how can i install back all this to copier?