If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am in need of help on this. I have a canon Imagepress with the error E000001-0070-05 and have not had any luck resolving the issue. Any suggestions are appreciated.
I am in need of help on this. I have a canon Imagepress with the error E000001-0070-05 and have not had any luck resolving the issue. Any suggestions are appreciated.
The fusser is not heating up. This error pops up about 15 seconds after power on and then it will shut itself off.
Open doors and turn on the copier and pull out the fuser unit to see if it will turn on without error code.
Go to service mode COPIER>FUNCTION>CLEAR>ERR) and restart machine.
This is to locate exactly the problem.
Comment