E006-0002-05 in imagepress c6000....help.

[DANIELCANON]

Hi,everybody, imagePRESS c6000 indicates code E006-0002-05 when turned on, when I turn on with the doors open code does not indicate that, but when I close the doors again presents this code. The manual states that there is an error in the registration unit, but does not say anything specific,
which is the unit that indicate?.

[teckat]

Re: E006-0002-05 in imagepress c6000....help.

Hi,everybody, imagePRESS c6000 indicates code E006-0002-05 when turned on, when I turn on with the doors open code does not indicate that, but when I close the doors again presents this code. The manual states that there is an error in the registration unit, but does not say anything specific,
which is the unit that indicate?.

---------------------------------------------
E006-0002

Have the ITB connectors been replaced
as well as ITB Driver pcbs


Try tracing wiring harnesses back to the DC Controller 1-1, connector J1020 check if loose.
Remove & re-seat this connector---



make sure all connectors on DC Controller PCB 1-1 are in there proper place

[DANIELCANON]

drawer roto.jpg