[Error Code] ir5870 E070-0102

[Apach]

Hi,

It's happened before, but after the cca. 400k copies I replaced Belt, cleaner, rollers and scraper.
Now it happens that during the day give this error once or several times or never.
I'm clean all and belt is tensed. What's the problem?


Thanks

[teckat]

Re: ir5870 E070-0102

Cheat the right side door assembly and check if the belt is rotating normally
does printer code when cheated open ?.

Check the secondary transfer roller and see if it is rubbing on the housing.
This may be because the secondary transfer roller bushings were not installed correctly.
If the bushings were mounted on the outside of the housing instead of on the inside.

After correctly positioning the bushings, the secondary transfer roller rotated normally and the E070 was resolved.





Ensure the ground spring is not bent and grounding the registration hard roller properly.