[Misc] Colors not on top of each other

[ckvist]

Hi...

I have a Canon IRC 5185. - I'm NOT technical, but i have a problem.

Colors are not on top of each others.

Please see attached pdf.

Is that a thing i can fix myself?

[northernlife]

Re: Colors not on top of each other

can run an auto-gradation adjustment and a color mismatch (unfamiliar if it's on this model or not). If it's still off then service mod adjustment of laser write times need to be adjusted.

[ckvist]

Re: Colors not on top of each other

Hi.

Thanks for your swift answer.

I have tryed it... And it is better... But still not enough. :-(

[tinnyjay]

Re: Colors not on top of each other

Hi...

I have a Canon IRC 5185. - I'm NOT technical, but i have a problem.

Colors are not on top of each others.

Please see attached pdf.

Is that a thing i can fix myself?

I have the same machine family (clc5151)
This is known as mis registration and could come from some sources.
1-Salt Sensor bad or not in its place can cause a mis registration
2-Charging rollers for each colors inside ITB (i think this is the problem you have)
3-Laser sync but sooooo rare to happen.

I would stop at 2nd point.
Did your printer have been staying shutted down for a long period of time??

[ckvist]

Re: Colors not on top of each other

I have the same machine family (clc5151)

Did your printer have been staying shutted down for a long period of time??

Yes... I DO NOT know how long! - But i got it used, for almost nothing... Arround what would be $180 ... So... It might be worth getting it to work.. :-)

[tinnyjay]

Re: Colors not on top of each other

Yes... I DO NOT know how long! - But i got it used, for almost nothing... Arround what would be $180 ... So... It might be worth getting it to work.. :-)

Change charge rollers.

[ckvist]

Re: Colors not on top of each other

Change charge rollers.

Is it the 'thing' below the colors?

[tinnyjay]

Re: Colors not on top of each other

Is it the 'thing' below the colors?

Hahahahaha sorry ....it is really hard to help you out

[teckat]

Re: Colors not on top of each other

Is it the 'thing' below the colors?

_______
U need training--U need a service manual--u need to remove ITB UNIT>remove ITB SHEET>needs interior cleaning of large rubber roller

180.00 for this printer (;>{
The fix unit cost 900.00

U get what u paid for

Call for a trained tech to inspect & gut out printer

[ckvist]

Re: Colors not on top of each other

_______
U need training--U need a service manual--u need to remove ITB UNIT>remove ITB SHEET>needs interior cleaning of large rubber roller

180.00 for this printer (;>{
The fix unit cost 900.00

U get what u paid for

Call for a trained tech to inspect & gut out printer

Well.... That would be Arround $1100... Still a good price! :-)

I'll find a man who can help. - All i wanted to know was, if it was something i could do myself. :-)

[Brian8506]

Re: Colors not on top of each other

No. Better left to an experienced tech

Well.... That would be Arround $1100... Still a good price! :-)

I'll find a man who can help. - All i wanted to know was, if it was something i could do myself. :-)

[ckvist]

Re: Colors not on top of each other

No. Better left to an experienced tech

Yes... Looks like it. Will do that. .-)

Thanks anyway.