If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Re: Canon iR (Colour) Send kit B1-P1-....FTP scanning
Originally posted by aco.bk
Hi,
Is there any manual how to set up Windows (XP, 7)PC and Canon iR `s for FTP scanning?
-------------------
Create an FTP Server on Windows 7 PC
1) Go to Control Panel and switch [view] from category to large icons.
2) Go to [Programs and Features].
3) Click [Turn Windows Features on or off].
4) Put a next to the following:
Internet Information Services FTP Server
Web Management Tools
World Wide Web Services
5) You must create a root folder on your C: drive for FTP publishing.
5) Hit [OK].
6) Go to [Control Panel].
7) Go to [Administrative Tools]
8) Go to [Internet Information Services Manager].
9) In the [Connections] pane, right click the sites node(Your computer name) in the tree.
10) Select Add FTP Site.
11) When the Add FTP Site wizard appears:
Enter "My New FTP Site" in the FTP site name box, then navigate to the ftproot folder that you created earlier. When you have completed these items, click Next.
12) Choose an IP address for your FTP site from the IP Address drop-down, or choose to accept the default selection of "All Unassigned."
13) Choose No SSL under SSL and click [NEXT].
13) Set [Authentication] to anonymous access and set [Authorization] to [Anonymous users].
14) Put a next to Read and Write for [Permission] and hit [Finish].
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment