IR2525 feeder paper size

[Alex ahir]

Hi All,

We got one canon ir2525 at customer place, customer wants to copy A4 paper size but everytime when they scans from feeder its picks up LTR only. so any one know how to change paper size or how to change feeder settings from service mode?

[teckat]

Re: IR2525 feeder paper size

Hi All,

We got one canon ir2525 at customer place, customer wants to copy A4 paper size but everytime when they scans from feeder its picks up LTR only. so any one know how to change paper size or how to change feeder settings from service mode?

------------;\
so u have A4 in one Cassette tray & LTR in the other Cassette tray
does 2525 read A4 paper when A4 is placed on glass
--------------------------------------------------------------------------------------------------
in service mode check or set below

(#SCAN> READER> OPTION> BODY> SENS-CNF)
Setting of the document detection sensor placement
The setting of document detection size is selected in accordance with the document sensor placement.
0: AB type
1: Inch type
2: A type


Adjusting the Stream Read Position
1) Enter to the service mode.
[Entering to Service Mode]
Press the additional function key "*", the 2 key, the 8 keys and the additional function key "*" sequentially on the operation panel of the
host machine.
2) On the service mode screen, select the following notations in sequence.
1 #SCAN
2 #SCAN READER
3 #READER FUNCTION
4 #FUNCTION INSTALL
5 #INSTALL STRD-POS
3) Confirm the"STRD-POS" is displayed, and then press the OK key.
Pressing the OK key will cause the scanner to start a scan; in several seconds, the machine will end the auto adjustment of the read position,
and then indicate "OK".

CAUTION:
If the machine fails the auto adjustment and indicates "NG", go through the following:
(1) Clean the platen roller of the DADF and the stream reading glass of the host machine; then, execute the auto adjustment once again.
(2) If the auto adjustment operation still fails, enter the service mode and make adjustments manually:
#SCAN>#SCAN_READER>#READER_ADJUST>#ADJUST_ADJXY>#A DJ-XY_STRD-POS
To find the optimum value, change the "STRD-POS" value checking the actual copy image.

[Alex ahir]

Re: IR2525 feeder paper size

Yes it has A4 and letter sizes installed on the tray. let me try tomorrow this settings.

Thanks for reply

------------;\
so u have A4 in one Cassette tray & LTR in the other Cassette tray
does 2525 read A4 paper when A4 is placed on glass
--------------------------------------------------------------------------------------------------
in service mode check or set below

(#SCAN> READER> OPTION> BODY> SENS-CNF)
Setting of the document detection sensor placement
The setting of document detection size is selected in accordance with the document sensor placement.
0: AB type
1: Inch type
2: A type


Adjusting the Stream Read Position
1) Enter to the service mode.
[Entering to Service Mode]
Press the additional function key "*", the 2 key, the 8 keys and the additional function key "*" sequentially on the operation panel of the
host machine.
2) On the service mode screen, select the following notations in sequence.
1 #SCAN
2 #SCAN READER
3 #READER FUNCTION
4 #FUNCTION INSTALL
5 #INSTALL STRD-POS
3) Confirm the"STRD-POS" is displayed, and then press the OK key.
Pressing the OK key will cause the scanner to start a scan; in several seconds, the machine will end the auto adjustment of the read position,
and then indicate "OK".

CAUTION:
If the machine fails the auto adjustment and indicates "NG", go through the following:
(1) Clean the platen roller of the DADF and the stream reading glass of the host machine; then, execute the auto adjustment once again.
(2) If the auto adjustment operation still fails, enter the service mode and make adjustments manually:
#SCAN>#SCAN_READER>#READER_ADJUST>#ADJUST_ADJXY>#A DJ-XY_STRD-POS
To find the optimum value, change the "STRD-POS" value checking the actual copy image.

[JUAN-PRAVTEC]

Re: IR2525 feeder paper size

Dear Alex, could solve your problem? I have the same problem with the feeder does not recognize my A4, cut the image to a LTR.
Greetings