irc 2380i intermittent jam code 0105 09

[ernesto]

Does anyone know how to fix the most frequently jam problems working in 2 sides in 2ND 3RD DELIVERY ASSEMBLY ?
This is an intermittent jam from 20 to 60 printings double side working and when the sheet is stuck, it is always in the same place just at the 2ND 3RD DELIVERY ASSEMBLY just at beginning to right door assembly (duplex unit).
the curiosity is that the code jam (0105 ...09 ) is a delay jam in the registration sensor ps26...but the problem seems a delay jam from PS10 Duplexing paper sensor (number 11 in the picture )or delay or stationary (pill up) jam from PS3A Duplexing paper inlet sensor(number 16 in the picture).

IN A4R the jam problems still happens.

jam code.jpgarragament sensor.jpg

I hope to hear from you

All the best

[teckat]

Re: irc 2380i intermittent jam code 0105 09

Does anyone know how to fix the most frequently jam problems working in 2 sides in 2ND 3RD DELIVERY ASSEMBLY ?
This is an intermittent jam from 20 to 60 printings double side working and when the sheet is stuck, it is always in the same place just at the 2ND 3RD DELIVERY ASSEMBLY just at beginning to right door assembly (duplex unit).
the curiosity is that the code jam (0105 ...09 ) is a delay jam in the registration sensor ps26...but the problem seems a delay jam from PS10 Duplexing paper sensor (number 11 in the picture )or delay or stationary (pill up) jam from PS3A Duplexing paper inlet sensor(number 16 in the picture).

IN A4R the jam problems still happens.

[ATTACH=CONFIG]24417[/ATTACH][ATTACH=CONFIG]24418[/ATTACH]

I hope to hear from you

All the best

=====================;\

lower right door & lower right inner door (pressure plate) have had pressure issues in the past
fix was presented >

is jam from all paper locations (cassettes ,deck )

Add a wrap to the return spring on the actuator for the Pre-Registration Sensor (PS7)
See below for the spring location.