[Error Code] E015 in IP1135

[wassem]

we have E015 and the sub code 1019
we changed the pre registration unit
we tried the buffer driver PCB
we tried DC controller
we tried the relay board
and still the same problem
anyone have any idea

[Joseph2011]

Re: E015 in IP1135

we have E015 and the sub code 1019
we changed the pre registration unit
we tried the buffer driver PCB
we tried DC controller
we tried the relay board
and still the same problem
anyone have any idea

good afternoon:

you comment error is due to problems in the pre-registration of the machine (zone B)
You should check the cables, clean the sensors and check engine even if the continuous problem with that should change the sensor wires is code
FM3-7780-000

[teckat]

Re: E015 in IP1135

we have E015 and the sub code 1019
we changed the pre registration unit
we tried the buffer driver PCB
we tried DC controller
we tried the relay board
and still the same problem
anyone have any idea

-----------------
What is Firmware ver. ?????

Connection Issue I Bet

Check for Dust built up on all 24V DC power supplies & Check all the connections

Cleaning the dust off

[wassem]

The Surprise

we have solved the problem
there was a drop in the 24v in the relay board
the reason is the front door switch
and that make that error (E 015)

[teckat]

Re: The Surprise

we have solved the problem
there was a drop in the 24v in the relay board
the reason is the front door switch
and that make that error (E 015)

[Zela]

Re: E015 in IP1135

Please advice.
I'm seeing the IP1110 error E015-1056 and I can not find it anywhere. According to SM should it be something in the feeding unit but do not know what ........

[teckat]

Re: E015 in IP1135

Please advice.
I'm seeing the IP1110 error E015-1056 and I can not find it anywhere. According to SM should it be something in the feeding unit but do not know what ........

================================
Reverse roller switch motorOver-current detect/ this is a TWO-PHASE SWITCH MOTOR

Check the connector of the reverse roller switch motor (M56), and replace the motor if necessary.

Outer delivery unit

Delivery buffer unit (front)
Reverse unit--

M56.JPG