Canon Imageclass D 1350 2 side problem (Always prints 1-2 side)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Doug James
    Senior Tech

    Site Contributor
    500+ Posts
    • Jan 2012
    • 935

    #1

    Canon Imageclass D 1350 2 side problem (Always prints 1-2 side)

    I cannot seem to turn this off. It says it's off but keeps printing 1-2 side. Even when only 1 page feed to copy through the ADF... I actually have 2 machines with this problem. I am a little surprised that I didn't find anything on this in earlier forum posts... Anyone seen this ?
  • northernlife
    Senior Tech

    500+ Posts
    • Sep 2011
    • 847

    #2
    Re: Canon Imageclass D 1350 2 side problem (Always prints 1-2 side)

    do you know how to perform a clear all on these units?

    Comment

    • Doug James
      Senior Tech

      Site Contributor
      500+ Posts
      • Jan 2012
      • 935

      #3
      Re: Canon Imageclass D 1350 2 side problem (Always prints 1-2 side)

      Originally posted by northernlife
      do you know how to perform a clear all on these units?
      No I sure don't

      Comment

      • northernlife
        Senior Tech

        500+ Posts
        • Sep 2011
        • 847

        #4
        Re: Canon Imageclass D 1350 2 side problem (Always prints 1-2 side)

        either additional functions , 2, 8 , add functions
        or *,2,8,*
        or *,2,8,add functions

        Not definitively familiar with that particular unit but the sm is most of the same
        you'll be going to the clear menu, press of when on clear
        then browse to all

        Note: The machine will be nuked to factory default.

        Comment

        Working...