Probleme mit Ir9060...

[tukan]

When printing, the prints are fine. When copying, the copies are too light
Both coronas, drum and developer Black are new. Laser, mirror and dust protection glasses cleaned.
The mirrors and glasses in the ADF are clean. Transfer Sheet is also new.


Sorry for this Gogle translation
Does anyone have a solution for me.

[teckat]

Re: Probleme mit Ir9060...

When printing, the prints are fine. When copying, the copies are too light
Both coronas, drum and developer Black are new. Laser, mirror and dust protection glasses cleaned.
The mirrors and glasses in the ADF are clean. Transfer Sheet is also new.


Sorry for this Gogle translation
Does anyone have a solution for me.

=========================
-Make sure to Set the exposure setting to "Text" Default. & not set to "Photo / Text"

Did u do a white level adjustment ?
Check the values for W-PLT- X/Y/Z in service mode under <ADJUST>CCD>W-PLT-X/Y/Z.
Check that the entered values match the values on the label located on the copy glass.

-Make sure to Set the exposure setting to "Text" Default. & not set to "Photo / Text"

[tukan]

Re: Probleme mit Ir9060...

Did u do a white level adjustment ? --- DONE

Check the values for W-PLT- X/Y/Z in service mode under <ADJUST>CCD>W-PLT-X/Y/Z. --- the values are correctly

[teckat]

Re: Probleme mit Ir9060...

Did u do a white level adjustment ? --- DONE

Check the values for W-PLT- X/Y/Z in service mode under <ADJUST>CCD>W-PLT-X/Y/Z. --- the values are correctly

========

do the service mode settings= match the values on the label located on the copy glass.

COPIER GLASS---W-PLT_X-Y-Z Location.JPG

HOW ARE THE INTERNAL TEST PRINTS COPIER> TEST> PG 10

How to Perform an Accurate Calibration Adjustment
read-----

[tukan]

Re: Probleme mit Ir9060...

========

do the service mode settings= match the values on the label located on the copy glass.

[ATTACH=CONFIG]24595[/ATTACH]

HOW ARE THE INTERNAL TEST PRINTS COPIER> TEST> PG 10

How to Perform an Accurate Calibration Adjustment
read-----

Calibration Adjustement -> Done
Test print PG10 -> Done, looks good
The values on the label -> Match
When you print everything seems ok.
When copying everything too bright

[teckat]

Re: Probleme mit Ir9060...

Calibration Adjustement -> Done
Test print PG10 -> Done, looks good
The values on the label -> Match
When you print everything seems ok.
When copying everything too bright

-------------------------------------------------

too bright ? u mean too light from glass ??

has your ACS>mode settings been checked
COPIER>ADJUST>MISC




have u checked this setting under Function Settings
-Make sure to Set the exposure setting to "Text" Default. & not set to "Photo / Text"

[northernlife]

Re: Probleme mit Ir9060...

Assuming optics have been cleaned? If prints are ok then the printer aspect should be disregarded and you should focus your energy on the reader.

[tukan]

Re: Probleme mit Ir9060...

-------------------------------------------------

too bright ? u mean too light from glass ??

has your ACS>mode settings been checked
COPIER>ADJUST>MISC




have u checked this setting under Function Settings
-Make sure to Set the exposure setting to "Text" Default. & not set to "Photo / Text"

too bright ? u mean too light from glass ?? YES

Other settings checked and OK.

[tukan]

Re: Probleme mit Ir9060...

Assuming optics have been cleaned? If prints are ok then the printer aspect should be disregarded and you should focus your energy on the reader.

Tomorrow i change the Reader-Unit for test.

[teckat]

Re: Probleme mit Ir9060...

too bright ? u mean too light from glass ?? YES

Other settings checked and OK.

-------------------------------
print out a PG10 > and place on glass for a copy>
& then post it here to see

[tukan]

Re: Probleme mit Ir9060...

-------------------------------
print out a PG10 > and place on glass for a copy>
& then post it here to see

https://drive.google.com/folderview?id=0Bwok145ulfJwcE5iekR4YWVfRzQ&usp=sharing

[teckat]

Re: Probleme mit Ir9060...

https://drive.google.com/folderview?...zQ&usp=sharing

--------------------------------------------------------------


These are PG10 copies made off the GLASS this shows that the Scanner/Reader is working perfectly.

and u are getting LIGHT copies from Glass on your documents

what type of docs are u copying ?

[tukan]

Re: Probleme mit Ir9060...

--------------------------------------------------------------


These are PG10 copies made off the GLASS this shows that the Scanner/Reader is working perfectly.

and u are getting LIGHT copies from Glass on your documents

what type of docs are u copying ?

Everything possible, newspapers, normal letters, certificates, brochures, music notes in color and black and white, I have a copy shop. Copies are always too bright prints are absolutely fine.

[teckat]

Re: Probleme mit Ir9060...

Everything possible, newspapers, normal letters, certificates, brochures, music notes in color and black and white, I have a copy shop. Copies are always too bright prints are absolutely fine.

_______
Can't understand how your PG 10 when placed on glass to copy it ,came out perfect , makes no sence
I want to see a glass copy of a magazine front page ,post it here

[Tricky]

Re: Probleme mit Ir9060...

Everything possible, newspapers, normal letters, certificates, brochures, music notes in color and black and white, I have a copy shop. Copies are always too bright prints are absolutely fine.

Is the paper you have used for the auto-grad adjustment the same paper you use for general copying?