CLC 3200 w. Imagepass C1 - need all The Info I can get

[AhaaOkay]

Regarding network setup

1. Does the fiery catch the ip automatically if
auto ip configuration is set to yes
and
DNS setup is set to yes

or is this two different animals in this regard.

Does it have it's own dhcp server built in ?


2.
PServer option under service is ?


3. Would I benefit on updating

device boot rom ver. 70.01
device system version 86.01
device function version 81.00
printer version 38.02

4. After making a test print from the fiery unit, I'd love to get this up running.
very nice print for an old printer


thanks in advance

[teckat]

Re: CLC 3200 w. Imagepass C1 - need all The Info I can get

Regarding network setup

1. Does the fiery catch the ip automatically if
auto ip configuration is set to yes
and
DNS setup is set to yes

or is this two different animals in this regard.

Does it have it's own dhcp server built in ?


2.
PServer option under service is ?


3. Would I benefit on updating

device boot rom ver. 70.01
device system version 86.01
device function version 81.00
printer version 38.02

4. After making a test print from the fiery unit, I'd love to get this up running.
very nice print for an old printer


thanks in advance

--------------------------------------------------------------------


How about a few dollars

imagePass C1 v2 Install.pdf
imagePASS C1 Configuration Guide.pdf

[AhaaOkay]

Re: CLC 3200 w. Imagepass C1 - need all The Info I can get

Thanks Teckat looks like the next step on my tour de la CLC 3200 w/image pass c1

Will make a little guide for with my findings as experience with this grows on me.

Darn the test print looked good, a bit over saturated (color) but wauuuu so printer is in good condition.

Dropped a pm


Think you're getting a fanboy more in your collection

thanks a lot