Help... What are these on my printing?

[Guest]

Does anyone know why I keep getting these little sprayed-like specs/dots on my printed pieces? I'm working with a CANON IMAGEPRESS C1+

20140417_165121.jpg

Any help/advice would be appreciated! Thanks.

[draph]

Re: Help... What are these on my printing?

Does anyone know why I keep getting these little sprayed-like specs/dots on my printed pieces? I'm working with a CANON IMAGEPRESS C1+

[ATTACH=CONFIG]24794[/ATTACH]

Any help/advice would be appreciated! Thanks.

Looks like a bad black toner cartridge would be my first guess. My second guess is that you thought saving $10.00 with the generic toner was a good idea. Hope it still feels that way after the hundreds you're about to spend.

[BelloPrints]

Re: Help... What are these on my printing?

We recently bought this machine and it seems the toners are still full. Unless they're not the ones they're suppose to be.

We also just purchased a brand new set of toners. So would changing the toners get rid of it? My initial thought was one the rollers would be "dirty"?

[mrban]

Re: Help... What are these on my printing?

I had same problem...!

[teckat]

Re: Help... What are these on my printing?

Does anyone know why I keep getting these little sprayed-like specs/dots on my printed pieces? I'm working with a CANON IMAGEPRESS C1+

[ATTACH=CONFIG]24794[/ATTACH]

Any help/advice would be appreciated! Thanks.

================================================== ===
Check the Small Waste Bottle under the Secondary Transfer Assembly.
This assembly has to be removed to access the bottle. Two screws and two high voltage connectors need to be removed along with a cover to access the bottle.



what about inspection & cleaning the interior
u may need a DEVELOPER CHANGE

[Rvale]

Re: Help... What are these on my printing?

Does anyone know why I keep getting these little sprayed-like specs/dots on my printed pieces? I'm working with a CANON IMAGEPRESS C1+

[ATTACH=CONFIG]24794[/ATTACH]

Any help/advice would be appreciated! Thanks.

humidity on the developing could bring this sort of thing, or bad toner, if you bought it second hand it might be the case, just changing the toner will solve just if you have a good one to put on the equipment and will not bring any immediate solution it takes quite a lot of pages to get rid of the old toner and have the new one o the developing, or if the developer itself is already old, it might not even help.
my advice, new developer and new toner, might cost more but will be way more efficient.