c7055 control panel falling

[ReproKev]

Optional upright control panel (same as c9065pro?) won't stay upright. The arm stays in position fine but the panel itself tilts down. I dis-assembled the ball/socket junction and saw something that looked like double sided taped mylar being used as shims - possibly to help hold it's position?

Do I need to add more shims to tighten the socket or replace the whole ball/socket assm? Is it the same part # as the c9065 - "FM3-4814 Control panel base unit"?

[teckat]

Re: c7055 control panel falling

Optional upright control panel (same as c9065pro?) won't stay upright. The arm stays in position fine but the panel itself tilts down. I dis-assembled the ball/socket junction and saw something that looked like double sided taped mylar being used as shims - possibly to help hold it's position?

Do I need to add more shims to tighten the socket or replace the whole ball/socket assm? Is it the same part # as the c9065 - "FM3-4814 Control panel base unit"?

======================================

Publication describes two procedures to minimize the Upright Control Panel from dropping down, tilting downward or shifting horizontally by the addition of new parts and the removal of an existing part.

Minimizing the Upright Control Panel From Dropping Down, Tilting Downward or Shifting Horizontal.pdf

==========================================

Publication describes the permanent countermeasure against the Upright Control Panel Assembly drifting down.

Permanent countermeasure to prevent the Upright Control Panel Assembly from Drifting Down..pdf

[ReproKev]

Re: c7055 control panel falling

Great information. Thanks!