I have a canon laser fax 710, when I receive copy is fine, only when I send or copy , the copy come out very light, anyone help please
Thanks
Thanks
-
-
Re: canon 710 laser fax machine send light copy
==================================
When making copies or sending faxes the scanned image is light.
Replacing the Contact Image Sensor has resolved this issue.
Suggest re-seating connectors/cable to the sensor before replacing.
Make sure the correct part number is used for the machine. The LC720i has a separate part number. Additionally, check the following service mode setting. #6 Scanner > 8. CS Type > A4/LTR is for the LC720i and B4 is for the LC730/LC710i
CONTACT SENSOR UNIT = HG5-2864-000 For the LASER CLASS 730i/710
CONTACT SENSOR UNIT = HG5-2870-000 For the LASER CLASS 720i
--------------------------------------------------------------------------------------------------------------------------------------------
Setting the Default Scan Quality Settings on the Laser Class 700 Series
To Set the Default Scan Quality Settings: 1) Press the Data Registration Key.
2) Press the up or down arrow key until the display reads 'Fax Settings'.
3) Press the Set key.
4) Press the up or down arrow key until the display reads 'System Settings'.
5) Press the Set key.
6) Press the up or down arrow until the display reads 'Fax Default'.
7) Press the Set key.
Here you will see 5 options for the Default Scan Quality Settings:
1) Resolution:
- Off
- Standard
- Fine
- Superfine
- Ultrafine
2) Contrast:
- Standard
- Light
- Darker
3) Doc. Type:
- Text
- Text/Photo
4) TX Mode:
- Memory Sending
- Direct Sending
5) TX Stamp:
- On
- Off
* Once you have made your selections, the machine will automatically default to them.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
Re: canon 710 laser fax machine send light copy
Thank you very much, I'll check allComment
Comment