[Error Code] ir 2525 E020

[roho]

I have a ir 2525, was making noise from the hopper assembly. No error codes. Replaced hopper assembly and init the dev. Ran 200 plus prints, then got a E020 0000 code. I'm going to return with the dev, but was wondering if anyone else has had this scenario, possibly a pcb problem as well? Any feedback would be great! Thanks!

[teckat]

Re: ir 2525 E020

I have a ir 2525, was making noise from the hopper assembly. No error codes. Replaced hopper assembly and init the dev. Ran 200 plus prints, then got a E020 0000 code. I'm going to return with the dev, but was wondering if anyone else has had this scenario, possibly a pcb problem as well? Any feedback would be great! Thanks!

============

u mean a iRAD C2525 ?

what is sub-code xxxx

An error code is shown in 7-digit [E000XXX] on the display on the operation panel. However,
[000] in 2 to 4 digit is not used. Thus, an error code is described as [EXXX] using 5 to 7 digit
in the service manual. (e.g.: E012 = E000012)