IR6065 finisher E1

[clw@solutiononenow.com]

when doing 11x17 saddle stiched booklet with three pages the last page sometimes doesnt go all the way down and its out of position when stapled and folded. looks like a staic issue but i have been unable to resolve. any ideas?

[teckat]

Re: IR6065 finisher E1

when doing 11x17 saddle stiched booklet with three pages the last page sometimes doesnt go all the way down and its out of position when stapled and folded. looks like a staic issue but i have been unable to resolve. any ideas?

--------------------------
Booklet Finisher-E1
jam code description is ?

Check the action of the FLAG, ROLLER or the ROLLER, WOODRUFF or PHOTO INTERRUPTER for proper action.

[clw@solutiononenow.com]

Re: IR6065 finisher E1

---

No error just misaligned page in booklet.
Thanks for info.

[vigour]

Re: IR6065 finisher E1

The sensor flags on Rear End Sensor pcb are worn, PI (18,19,29)
You can replace the flags, or pcb assy
This is the cause of 95% of booklet maker problems, from IR600 to present

Have fun