[Misc] Attempt to activate Post script on IRC 5185i

[wachman]

I have a good code just not activated yet on the machine. When i try to activate it it gives me the error of not enough memory for that option. I can get memory but not 100% sure

is it possible that this is a hard drive or is there something else that I need to get this to work?

Or will adding more ram make it activate?

[teckat]

Re: Attempt to activate Post script on IRC 5185i

I have a good code just not activated yet on the machine. When i try to activate it it gives me the error of not enough memory for that option. I can get memory but not 100% sure

is it possible that this is a hard drive or is there something else that I need to get this to work?

Or will adding more ram make it activate?

================================================== ============================
All models come standard with 1 GB of RAM. To enable some optional functions, it is necessary to install the iR 512MB Expansion RAM-C1 to expand the memory capacity of the machine to 1.5 GB.

http://www.amatteroffax.com/itempagey_invid_1365980538_d_canon-imagerunner-512mb-memory-expansion-ram-c1.html
$119.19
Canon 512MB memory Expansion RAM -C1 - 0529B002AA Imagerunner C4580i, ImageRunner C5185i, ImageRunner C4080i, ImageRuner C4580i, ImageRuner C4580,
$210.60



Make sure the Expansion Memory Kit C-1 (0529B002AA) is installed.The imageRUNNER needs 512mb of memory for this feature to work. Install the 512mb SDRAM in slot J1002 on the Main Controller.



Available Print Controller Summary:

Copier Models:	Supported Print Controllers:
imageRUNNER C4080i / C4580i / C5180i	- UFRII/PCL Printer Kit -N1 (standard) - PS Printer Kit -N1 * (optional) - imagePASS H1 ** (optional) - ColorPASS GX100 ** (optional)
imageRUNNER C4080 / C4580 / C5180	- UFRII/PCL Printer Kit -N1 (optional) - PS Printer Kit -N1 * (optional) - imagePASS H1 (optional) - ColorPASS GX100 (optional

* PS Printer Kit-N1 requires that UFRII/PCL Printer Kit-N1 and iR 512MB Expansion RAM-C1 be previously installed.

** Requires the optional Open Interface Board on the 'i' models.

[teckat]

Re: Attempt to activate Post script on IRC 5185i

I have a good code just not activated yet on the machine. When i try to activate it it gives me the error of not enough memory for that option. I can get memory but not 100% sure

is it possible that this is a hard drive or is there something else that I need to get this to work?

Or will adding more ram make it activate?

================================================== =====

after u get x ram----

The License Management System is a website used to register LANs (License Access Numbers) for Universal Send Kits and other optional kits for the Canon imageRUNNER devices.

To Register a LAN:

1. Using a Web Browser (ex. Internet Explorer) on your PC, go to the LMS website at http://www.canon.com/lms/ir.

2. Enter in the LAN provided in the optional kit (ex. Universal Send Kit).



3. Enter the serial number for the imageRUNNER device (the machine that the optional kit will be installed on). BE SURE TO ENTER THE CORRECT SERIAL NUMBER.

4. Copy down the License Key number for the installation.

For more information, please see the attached file lms.pdf.



To Install the Optional Kit on the imageRUNNER Device:

1. On the copier, hit Additional Functions > System Settings > scroll down > License Registration.

2. Enter the License Key number you copied down when registering the LAN on the LMS website.

3. Hit the Start button on the License Registration screen.

4. Reboot the copier.

* Note that some optional kits may require certain prerequisite items to be installed before performing the above steps.

[wachman]

Re: Attempt to activate Post script on IRC 5185i

Thank you Teckat!

Super detail!


Just so happens I have a parts c4080 that has that ram in it. pulled and headed out to customers for install!

Thanks for the quick reply