[Jamming] IR 3245 ADF Jamming

[brotherlarry]

OK. Feeds 1 Sheet fine Feeds first sheet of stack fine put fails to pick up 2nd sheet, put sheets back in feeder feeds 1st sheet then 2nd sheet, but not 3rd. Saw some old posts with similar problems but the links had expired. Machine has less than 80k replaced sep pad and both rollers

[northernlife]

Re: IR 3245 ADF Jamming

It's not detecting the end of the first original. The original sensor detection flag on these I've had to use some muscle and reform them as the flag would trip it twice when it was swinging back to HP.

[canonbundy]

Re: IR 3245 ADF Jamming

OK. Feeds 1 Sheet fine Feeds first sheet of stack fine put fails to pick up 2nd sheet, put sheets back in feeder feeds 1st sheet then 2nd sheet, but not 3rd. Saw some old posts with similar problems but the links had expired. Machine has less than 80k replaced sep pad and both rollers

There was actually a Bulletin on this & believe it or not the fix was to reform the Bracket which holds the Original Detection Sensor up (or down) 1mm at a time - it works!!!