ip 1135+

[wassem]

I want to ask what is the last version of service manual of that monster (imagepress 1135)
i have version 5
i faced many error codes and jams not mentioned in my manual
and if request the description in service mode the screen blank
notice: i am using version 62 of SST

[teckat]

Re: ip 1135+

I want to ask what is the last version of service manual of that monster (imagepress 1135)
i have version 5
i faced many error codes and jams not mentioned in my manual
and if request the description in service mode the screen blank
notice: i am using version 62 of SST

======================;-/
imagePRESS 1135+/1135/1125+/1125/1110+/1110 Series
Last manual > August 29, 2013/ no rev. listed


At power on the LCD screen does not turn on and only the Green LED is lite on the control panel.


Check connector J681 for 3.3VDC at the All Night Power Supply. This 3.3VDC activates the AC Driver PCB entering at connector J1012. The AC Driver will not turn on if the 3.3VDC is missing.

Replacement of the ALL Night Power Supply resolve the no power issue.

-------------------------------------------------------------------------------------------------------------
Green LED on the control panel is lit with no display.


Check LEDs on the MN-CON PCB2 if only LED 10 is on check connector J20 on MN-CON PCB2 for 12 volts DC at pins 1 and 2. If the 12 volts DC is missing a failure of the Power Relay PCB has occurred.

Replacement of the Power Relay PCB will resolve the no power condition.


Latest
v63.01