iR3235N

[aco.bk]

This happens when machine goes from standby to ready.
after whole job is complete(1 or 1000 copies)then display error e0001-0000.Main thermistor and whole fuser assy replaced.
In service mode Display Analog temperature reading is 300 C when error was displayed.Perfectly working before standby.
PLS help

[northernlife]

Re: iR3235N

change your fixing film assembly. fixing thermistor's tell the dcon to turn on the ac driver to provide voltage. Cut off is supposed to be ~200 degrees. Try fuser first then ac driver as it may have a sticky triarc and not shutting off the heat in time.

[aco.bk]

Re: iR3235N

North TY very much.Problem was FK2-6298-000 - ACC POWER SUPPLY UNIT 230V.
I will inspect faulty element and report to You.Thanks again

[aco.bk]

Re: iR3235N

2014-06-25 11.57.29.jpg2014-06-25 11.57.33.jpg2014-06-25 11.57.43.jpgthere was a boom. :-)

[northernlife]

Re: iR3235N

Holy crap, some of that blue smoke mmmhmm Almost looks like it took a lightning hit.