[Error Code] Canon irc5030 error code e540-005

[Hong1007]

Hi all,

i hv a machine got error code e540-005, i hv check the finicher but still hv a error code
any solution solve this problem??

thanks

[20 year tech]

Re: Canon irc5030 error code e540-005

is this the inner finisher or the external ?

[teckat]

Re: Canon irc5030 error code e540-005

Hi all,

i hv a machine got error code e540-005, i hv check the finicher but still hv a error code
any solution solve this problem??

thanks

==============;-/

E540-8005 is defined as a tray 1 shift motor speed error/for Inner

did u check for any jam codes history related to finisher

[Hong1007]

Re: Canon irc5030 error code e540-005

==============;-/

E540-8005 is defined as a tray 1 shift motor speed error/for Inner

did u check for any jam codes history related to finisher

Hai,

i check the jam history already, show sensor S14 problem! But second problem is the fnisher can't move down! After print 10 page, show out "remove the paper at output tray"
got anyway solution to solve this problem!

thanks

[northernlife]

Re: Canon irc5030 error code e540-005

Does the tray move at all and then give a 1c40 jam code before the ecode?

[teckat]

Re: Canon irc5030 error code e540-005

Hai,

i check the jam history already, show sensor S14 problem! But second problem is the fnisher can't move down! After print 10 page, show out "remove the paper at output tray"
got anyway solution to solve this problem!

thanks

S14---replace the stack tray clock sensor S14
The part number for S14 is WG8-5836-000.



what type Finisher is installed
--Staple Finisher-C1 ?
--Inner Finisher A-1 ?

liked asked> is it the inner or exterior finisher-

-if Internal Finisher-A1 >make sure the finisher paper tray is not crooked.
(will effect proper height of the stack to be detected correctly).
(realign so that it is straight and level).






COPIER > OPTION > USER > TRY-STP is set to "1"
COPIER > OPTION > USER > TRAY-FLL is set to "1".

[Hong1007]

Re: Canon irc5030 error code e540-005

S14---replace the stack tray clock sensor S14
The part number for S14 is WG8-5836-000.



what type Finisher is installed
--Staple Finisher-C1 ?
--Inner Finisher A-1 ?

liked asked> is it the inner or exterior finisher-

-if Internal Finisher-A1 >make sure the finisher paper tray is not crooked.
(will effect proper height of the stack to be detected correctly).
(realign so that it is straight and level).






COPIER > OPTION > USER > TRY-STP is set to "1"
COPIER > OPTION > USER > TRAY-FLL is set to "1".

hi,

I am a innel finisher A1, i will follow ur setting but still same the problem...

[northernlife]

Re: Canon irc5030 error code e540-005

Does it move at all when you cycle the unit? If it's just stationary then motor/harness/finisher controller

[shazza]

Re: Canon irc5030 error code e540-005

Hi All,

@Teckat .. Anyone got a photo of where this sensor is located in Internal Finisher E1


S14---replace the stack tray clock sensor S14
The part number for S14 is WG8-5836-000.



what type Finisher is installed
--Staple Finisher-C1 ?
--Inner Finisher A-1 ?

liked asked> is it the inner or exterior finisher-

-if Internal Finisher-A1 >make sure the finisher paper tray is not crooked.
(will effect proper height of the stack to be detected correctly).
(realign so that it is straight and level).






COPIER > OPTION > USER > TRY-STP is set to "1"
COPIER > OPTION > USER > TRAY-FLL is set to "1".