IR 5000 Jam code 0201

[ar6565]

I had stationary Jam code 0201 so I changed the rubber manual Feed Roller pickup and the Separation roller (with base) with a new ones.
But still I have this Jam Code 0201 especially with paper A5.

[teckat]

Re: IR 5000 Jam code 0201

I had stationary Jam code 0201 so I changed the rubber manual Feed Roller pickup and the Separation roller (with base) with a new ones.
But still I have this Jam Code 0201 especially with paper A5.

------------------------------------------;-/


is this from bypass only /

does this happen from other feed locations ?
----------------------------------------------------------------------------------------------------------------------------
the clearance of the registration paper guide may be inadequate causing the paper to stall in this area.
Adjusting the support tabs upwards slightly restoring the proper clearance may resolve this issue.

[ar6565]

Re: IR 5000 Jam code 0201

Thanks Mr tackat very much.
It was the right tab near the registration clutch was a slightly bent. Now it works OK.

[teckat]

Re: IR 5000 Jam code 0201

Thanks Mr tackat very much.
It was the right tab near the registration clutch was a slightly bent. Now it works OK.

--------------------------;=/

COLOR HAND.jpgwelcome