[Jamming] Jam paper in the area shown in the picture

[Swahiba]

Heloo

thanks members for the support that every day people appreciate.

My canon ir 3300 show paper jam in the area shown in the picture.

It pick the paper from the paper trays but even a single paper can not cross the area in the picture and starting showing paper jam

they following had arleady been changed from the machine that operate normal but the problem still exist

1)main motor changed
2) solnaid swich changed
3)dc controller changed
4) power supply changed
5) a set of paper feeding unit that pick the paper from the paper trays changed

please help me

+255787811747

[teckat]

Re: Jam paper in the area shown in the picture

Heloo

thanks members for the support that every day people appreciate.

My canon ir 3300 show paper jam in the area shown in the picture.

It pick the paper from the paper trays but even a single paper can not cross the area in the picture and starting showing paper jam

they following had arleady been changed from the machine that operate normal but the problem still exist

1)main motor changed
2) solnaid swich changed
3)dc controller changed
4) power supply changed
5) a set of paper feeding unit that pick the paper from the paper trays changed

please help me

+255787811747

---------------------------------------------------------------
what is the JAM CODE

Check PS9 Registration Sensor Flag/Sensor operation

+++ it also

Looks like a delay jam to Image Leading Edge Sensor (PS12) from any paper source
Poor Registration Motor (M9) dose this

look

[northernlife]

Re: Jam paper in the area shown in the picture

reg motor, sensor or the paper pickup assembly wasn't reinstalled exactly correctly. Lead edge making into the registration (Is there some friction when you remove the paper)? And is the lead edge damaged. I've seen horizontal reg eff up and cause this on the 2200's without spitting out an error code.