Hello, I have a problem to calibrate the imagePASS A1 in an IR ADV C9065 PRO, every time I go to scan the page COLORCAL with grayscale machine sends message jam in the feeder. Please some help.
Thank you.
Thank you.
-
-
Re: Problem to calibrate the A1 imagePASS
=======================================
Fiery Patch 1-19Q9PI for the imagePASS-A1 v1.0.
This patch resolves an issue where a jam is reported at the Automatic Document Feeder when a ColorCal calibration is performed on an imageRUNNER ADVANCE device with v55.xx(v2) firmware or above.
Attached Files -
1-19Q9PI.zip (882.0 KB, 0 views) -
Fiery Patch 1-19Q9PI for the imagePASS-A1 v1.0.pdf (36.5 KB, 0 views)
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
-
-
Re: Problem to calibrate the A1 imagePASS
Yes, applying the patches is the solution. Had this issue myself. Good luck!=======================================
Fiery Patch 1-19Q9PI for the imagePASS-A1 v1.0.
This patch resolves an issue where a jam is reported at the Automatic Document Feeder when a ColorCal calibration is performed on an imageRUNNER ADVANCE device with v55.xx(v2) firmware or above.
Attached Files - 1-19Q9PI.zip (882.0 KB, 0 views)
- Fiery Patch 1-19Q9PI for the imagePASS-A1 v1.0.pdf (36.5 KB, 0 views)
Comment
-
-
Re: Problem to calibrate the A1 imagePASS
Thank you very much, I resolved my problem
Comment
Comment