[Misc] Fainting and unsticky Text after photocopy

[Engels]

Greetings to you all on the technical bench helping us out here!
Please, I need more help. That is with this my Canon IR2420, when I photocopy the text is faint and when u rob your finger or piece of cloth on the fainted copied text, it's coming out living the paper blank.
Thank you all for the past solutions sent to my previous posts for all works well. God Bless You All.

[teckat]

Re: Fainting and unsticky Text after photocopy

Greetings to you all on the technical bench helping us out here!
Please, I need more help. That is with this my Canon IR2420, when I photocopy the text is faint and when u rob your finger or piece of cloth on the fainted copied text, it's coming out living the paper blank.
Thank you all for the past solutions sent to my previous posts for all works well. God Bless You All.

----------------------/
This machine controls the fixing temperature according to the "media type" selected in the user mode and the "target temperature" set in the "special mode."

what media type using or selecting >>>>??

Set Special Mode P to "ON"


Fixing Film/ Pressure Roller Issue
fix film.JPG


are u a tech // if not call for service


*Additional Functions/>Adjustment/Cleaning

Special Mode M Low, Standard(*), High
Special Mode N Off(*), On
Special Mode O Stack Bypass: Off(*), On
Drawer: Off(*), On
Special Mode P Off(*), On
Special Mode S Off(*), Speed Priority1, Speed Priority 2
* Factory setting (It may be different depending on the countries or region of destination.)

[northernlife]

Re: Fainting and unsticky Text after photocopy

fuser isn't cooking the toner onto the paper properly. Rebuild that sucker. If it's plain paper out of the tray you can toy with the heat settings but generally replacing the fixing film will solve it. Need to answer teck's response though.