0001 jam code

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • stevelightyear2000
    Junior Member
    • Jan 2012
    • 9

    #1

    [Jamming] 0001 jam code

    I have got a duplex image reader E1 on a iradvc 5240 and when use the feeder it feeds the documents and jams after last document is fed out jam code 0001 the pick up rollers are still down and rotating and green light still on
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: 0001 jam code

    Originally posted by stevelightyear2000
    I have got a duplex image reader E1 on a iradvc 5240 and when use the feeder it feeds the documents and jams after last document is fed out jam code 0001 the pick up rollers are still down and rotating and green light still on
    ========'
    DADF Jam code 0001
    replace sensor SR1 (WG8-5783-000) on the document tray .
    For troubleshooting purposes you can swap sensors SR1 with SR8 (LTR-R/LGL identification sensor).
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • stevelightyear2000
      Junior Member
      • Jan 2012
      • 9

      #3
      Re: 0001 jam code

      Originally posted by teckat
      ========'
      DADF Jam code 0001
      replace sensor SR1 (WG8-5783-000) on the document tray .
      For troubleshooting purposes you can swap sensors SR1 with SR8 (LTR-R/LGL identification sensor).


      Thanks i will will give it a try

      Comment

      • stevelightyear2000
        Junior Member
        • Jan 2012
        • 9

        #4
        Re: 0001 jam code

        Replaced df driver PCb

        Comment

        • teckat
          Field Supervisor

          Site Contributor
          10,000+ Posts
          • Jan 2010
          • 16083

          #5
          Re: 0001 jam code

          Originally posted by stevelightyear2000
          Replaced df driver PCb

          did u input back the values written on the service label (on the back of the Reader Front Cover).
          Attached Files
          **Knowledge is time consuming, exhausting and costly for a trained Tech.**

          Comment

          Working...