I have a CLC 1180 that keeps coding out with E061-36. I changed the charge grid with no results. Also, the screen seems to flicker. When I cheat the door and lower the transfer unit lever, the flickering stops. Can anyone help me with this old man please?
Canon CLC 1180 E061-36
Collapse
X
-
Tags: None
-
Re: Canon CLC 1180 E061-36
u sure about that 0036 ??
see many 0096 codes & not a 0036 on this series
i would replace the Primary Corona Unit-
note: make sure not to over tighten that screw used for grid plate /
could be an arching issue
Check to see if the LED is lit on the Potential Control PCB. If the LED is not lit, this would be an indication that the Potential Control PCB is not receiving it's voltage from the HVT-DC PCB. Check and reseat connector J3 on the Potential Control PCB.
DC DRIVER also has issues in this series**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Comment