[Error Code] Canon irAdv 7065

[mrmechanic]

Replaced upper and lower fixing belts,
After reboot machine shows a 0c1f jam, pull out process unit to clear, but then error code e014 0001 appears.
Rebuilt fuser several times even refitting old unit. Any ideas

[canonclc]

Re: Canon irAdv 7065

Replaced upper and lower fixing belts,
After reboot machine shows a 0c1f jam, pull out process unit to clear, but then error code e014 0001 appears.
Rebuilt fuser several times even refitting old unit. Any ideas

had this about a year ago,turned out to be the loom on the draw to the fuser.try the fuser assy in another mc if you can.
the jam code is a red herring.concentrate on the error code.
also check the sensors on the fuser are all in place and nothing jamming the motors.

[mrmechanic]

Re: Canon irAdv 7065

thanks, nothing binding. will try the loom

[Canuck]

Re: Canon irAdv 7065

If machine was ok before you replaced the fixing belts its something that you caused obviously. Connector not seated completely, bent pin or something

[canonbundy]

Re: Canon irAdv 7065

As Canuck said, also check the Red Painted Screw (that you probably unscrewed) in the Upper Belt assy & reposition.

Aussies kickin' ur ass too in the Games - all good fun.

[mrmechanic]

Re: Canon irAdv 7065

Problem resolved,
Fixing motor, don't know why but there it is.
Thanks for the input.
You guys take sport far too serious lol