M1 ImagePass not booting.

[jjjg]

My M1 connected to the IR105 is stopping at either Testing Memory or passing that just stalling at around 75% of the booting. It won't go further than that, I've been rebooting it and leaving it to see if it would eventually boot and nothing.

I'm assuming it's the internal HDD. Has anyone changed it successfully on their own? To get a new M1 would probably be a lot and even a used one as well.

I'd prefer to not use the M1 at all, but the 105 has no printer controller for me to hook the PC directly up to it. Is there a way for me to connect to PC to IR-105 direct?

Any ideas or suggestions?

[teckat]

Re: M1 ImagePass not booting.

My M1 connected to the IR105 is stopping at either Testing Memory or passing that just stalling at around 75% of the booting. It won't go further than that, I've been rebooting it and leaving it to see if it would eventually boot and nothing.

I'm assuming it's the internal HDD. Has anyone changed it successfully on their own? To get a new M1 would probably be a lot and even a used one as well.

I'd prefer to not use the M1 at all, but the 105 has no printer controller for me to hook the PC directly up to it. Is there a way for me to connect to PC to IR-105 direct?

Any ideas or suggestions?

======================================
see pdf-----------------------

M1 troubleshooting process--;
Checking the M1 as a stand-alone unit

[jjjg]

Re: M1 ImagePass not booting.

Thank you so much, will start with the PDF diagnostics right now.