[Error Code] ir 3300 E00 003 0000

[Guest]

kindly guide me how to solve the error of E 00 003 00 00 that is very low temp through gandhi2020@gmail.com

[laitang]

Re: ir 3300 E00 003 0000

Main cause:
-The fixing film unit is faulty (i.e., the main thermistor (TH1) has poor contact or has an open circuit; or,
-The fixing heater is faulty).
-The main power supply PCB is faulty.
-The DC controller PCB is faulty.

To clear the error, execute the following in service mode:
COPIER>FUNCTION>CLEAR>ERR.

[Jhonjon]

Re: ir 3300 E00 003 0000

kindly guide me how to solve the error of E 00 003 00 00 that is very low temp through gandhi2020@gmail.com

Majority of possible solution was given by Mr.Laitang. Try to test a whole fusing unit to skip the trouble and delay of checking the film, thermistor and filament. If the trouble cannot reset by program, and then proceed by testing the boards.

Good luck!