Any alternatives to the M1 Image Pass?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jjjg
    Technician
    • Jul 2012
    • 16

    #1

    Any alternatives to the M1 Image Pass?

    Other than installing the network kit to my IR-105. Is there any print controllers out there that are reasonable priced but
    can do the same job as the Image Pass? Anything like an adapter I can buy in store or online?
  • KenB
    Geek Extraordinaire

    2,500+ Posts
    • Dec 2007
    • 3945

    #2
    Re: Any alternatives to the M1 Image Pass?

    If I remember, you may be able to attach an M2, but I'm sure that's not the answer you were looking for.

    It's a Fiery or internal controller, name your poison.

    i would think you could find either online out there, but be careful. Believe it or not, there are actually people out there who will try to unload their non-functional junk on you.
    “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

    Comment

    • jjjg
      Technician
      • Jul 2012
      • 16

      #3
      Re: Any alternatives to the M1 Image Pass?

      Yeah, that wasn't what I was hoping for. Was hoping there was something new by now that I could pick up at a computer/electronics store that would work as a print controller/networker that was easier than getting another Fiery or the Kit.

      Thanks anyways.

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: Any alternatives to the M1 Image Pass?

        Originally posted by jjjg
        Yeah, that wasn't what I was hoping for. Was hoping there was something new by now that I could pick up at a computer/electronics store that would work as a print controller/networker that was easier than getting another Fiery or the Kit.

        Thanks anyways.
        -----------------------------------------

        14yr old Printer

        not cost effective to spend 600/700 on a used/or so called refurb M1 or M2
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        Working...