Canon iRC3480, waste toner container

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jetbus
    Junior Member
    • Nov 2010
    • 8

    #1

    Canon iRC3480, waste toner container

    Does anyone know how to reset the Warning screen " Replace Waste Toner Container"

    The machine is a Canon iRC3480

    This Warning message has come up in the display and wont reset even though new container has been replace but warning won't clear.
  • teckat
    Field Supervisor

    Site Contributor
    10,000+ Posts
    • Jan 2010
    • 16083

    #2
    Re: Canon iRC3480, waste toner container

    Originally posted by Jetbus
    Does anyone know how to reset the Warning screen " Replace Waste Toner Container"

    The machine is a Canon iRC3480

    This Warning message has come up in the display and wont reset even though new container has been replace but warning won't clear.

    To clean or replace PS11 the black hopper drive assembly must be removed, the procedure for removing the hopper drive assemblies can be found on page 10-21 of the service manual.

    Sensor PS11 is located at the auger opening that might have toner dust on it or is malfunctioning. Verify the position of the PS11 and the auger open close shutter and replace the PS11 consequently.




    PS11 Waste toner case detection (absent) sensor WG8-5772
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

    Comment

    • Canuck
      Tech Specialist

      1,000+ Posts
      • Nov 2007
      • 1713

      #3
      Re: Canon iRC3480, waste toner container

      Yeah..the photo interrupt gets toner in it...I get at it with a piece of surgical tube on the wand attachment on my old faithful laservac Push the coupling back and done in a minute....

      Comment

      • teckat
        Field Supervisor

        Site Contributor
        10,000+ Posts
        • Jan 2010
        • 16083

        #4
        Re: Canon iRC3480, waste toner container

        ps11.JPG
        **Knowledge is time consuming, exhausting and costly for a trained Tech.**

        Comment

        • Jetbus
          Junior Member
          • Nov 2010
          • 8

          #5
          Re: Canon iRC3480, waste toner container

          Originally posted by Jetbus
          Does anyone know how to reset the Warning screen " Replace Waste Toner Container"

          The machine is a Canon iRC3480

          This Warning message has come up in the display and wont reset even though new container has been replace but warning won't clear.
          Thanks to everyone who replied I will give this a try

          Comment

          • northernlife
            Senior Tech

            500+ Posts
            • Sep 2011
            • 847

            #6
            Re: Canon iRC3480, waste toner container

            If that doesn't work then service mode > Copier > Counter > drbl1 > wst-tnr select and hit C to clear. I have a lot of the 3380's that the waste toner counter doesn't clear upon replacement of the waste toner bottle.

            Comment

            • Canuck
              Tech Specialist

              1,000+ Posts
              • Nov 2007
              • 1713

              #7
              Re: Canon iRC3480, waste toner container

              When that photo-interrupt(PS11) is dirty,it will tell you to" insert waste toner container" as opposed to "replace waste toner container" when the window on the toner bottle is dirty. Two different things

              Comment

              Working...